It is very close to the Le2 specs, little bigger duration and lift, the biggest thing is it was made for 1.7 rr. I came off the bolt-on craze and didn't want to have to buy the 1.6's.. So Bret made me this custom cam dubbed B-rad v.1 and v.2

v.1 laid down 417rqhp and 394 rwtq
(unported intake)

I was hoping for some 430 + hp and 390 +tq with the v.2 cam, with Ported intake..
The v.2 cam has less torque and more hp, also the rpm range is a little higher than the v.1..

I wouldn't recommend the B-rad series cams unless you already have the 1.7 and didn't want to change, the 1.6 rocker provided a better valve train geomentry with less rocker mass.. BUT as you can tell by the numbers they do perform quite well.

B-rad

 

I know, stupid question, but are those numbers with or without juice?

thx

 

N/A Can't wait to see the numbers with a 150 shot

Custom cams rule.

 

N/A i have a 150 shot but haven't sprayed it on the dyno.