CC306 and no tune.. How will it run? Mines going nuts!
OK update.. Seems to me like it was just old oil back there.. I have that stupid rear main leaking a bit and the oil drain plug was pouring out oil and blowing it everywhere.. i got a new one today and cleaned everything up... im going to get it tuned tomorrow and see if it leaks on the way there. I figured i should do this first and clean behind the manifold and see if it gets oily again to be perfectly sure its the manifold.. the symptoms dont seem like the manifold.. there is no oil on the exhaust, no oil on the fly wheel.. just the side of the oil pan (which was there before the tear down) and some out under the tranny from the drain plug and 100+MPH speeds blowing it back
.. Ill keep you guys posted on how it runs after the tune and i will be making a video for people who are thinking about getting the cc306, post here if you want a copy.. it should be about 7-9 minutes long to show idle, acceleration, cruising, down shifting, WOT bursts, and what ever else we like to do, maybe ill find a ricer or two to mess with.. let me know..
.. Ill keep you guys posted on how it runs after the tune and i will be making a video for people who are thinking about getting the cc306, post here if you want a copy.. it should be about 7-9 minutes long to show idle, acceleration, cruising, down shifting, WOT bursts, and what ever else we like to do, maybe ill find a ricer or two to mess with.. let me know..
Better up top.. same down low.. (Tuned).. so who is better? madz28.com or pcmforless.com? or are they the same? Im only going with them because i dont want to bother this guy who tunes my comp anymore.. i feel like a nusence. Ill be uploading it myself though..
Originally posted by madwolf
Actually, I'm alive and shipping orders right away.
Actually, I'm alive and shipping orders right away.
.. ill pm you with my number..
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
squarehead
General 1967-2002 F-Body Tech
0
Nov 21, 2014 08:02 PM



