Will this ignition work?
Thread Starter
Registered User
Joined: Sep 2003
Posts: 914
Will this ignition work?
Administrator
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
Yes.
The MSD-6T is simply a slightly more rugged version of the MSD-6A with vibration mounts. A -6A is more than adequate. You can also get a "harness" from MSD that makes it easy to install, with no splicing. You need to specify dual-connector (93-95) or single-connector (96/97) coil for the harness.
Some people feel the added spark of the MSD boxes has a negative affect on the OptiSpark, but I ran the MSD-6A for 50K miles and never had any problem with the cap/rotor section of the Opti.
The MSD-6T is simply a slightly more rugged version of the MSD-6A with vibration mounts. A -6A is more than adequate. You can also get a "harness" from MSD that makes it easy to install, with no splicing. You need to specify dual-connector (93-95) or single-connector (96/97) coil for the harness.
Some people feel the added spark of the MSD boxes has a negative affect on the OptiSpark, but I ran the MSD-6A for 50K miles and never had any problem with the cap/rotor section of the Opti.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Oncomingstorm22
General 1967-2002 F-Body Tech
4
Jan 22, 2015 07:15 PM
