Im doin a header install, and I'm gonna do plugs wires with it. What brand would be best. I will be using 1 3/4 MAC headers, and I would like some wires that fit in my stock looms, If they fit in the stock looms will i have to worry about burnt wires? also the headers are non-coated just if you need to know.
thanks
sean
ps I would also like to find the cheapest place to get the plugs wires

 

A lot of people have had success with a lot of different wires so it's hard to say which are the best. I'm running Taylor wires routed over the valve covers with Made For You Looms. You won't have a problem routing them in the stock looms as long as you make sure the wires aren't touching the header, but to me it seemed a lot easier to route them over the valve covers.

 

If you're going N/A your best bet is NGK TR55s .050. Non N/A applications go with the NGK TR6s .030. I vote for the magnecor or the Taylor wires and defenetly since you have headers a over-the-valve-cover setup would be something to consider. Thunderracing.com has some great prices.

On a sider note, those dyno numbers you have in your sig, you did that before those mods I'm hoping?

Dan

 

those #s are with a slp LM and AS&M cai. thats rwhp

 

DOH! I saw AS&M and I automatically thought you had there headers. It's been a long day....

 

Accel extreme heat 9000 plug wires, don't know about plugs, but for headers, these are definitely a better add on.

 

thats ok, will the taylor 8mm fit in my stock looms, also what about BOSCH plugs I really dont want to wait for the shipping on plugs/wires. Ill probably just go to auto crap (i mean zone) and get the taylor from them, but theyre like 80-90$ there
thanks again
sean