Is there an advantage to going with NSA roller rockers, guideplates, and hardened pushrods VS. just a set of Self Aligning roller rockers?

I plan on changing the springs and all that fun stuff to LT4 stuff, but I saw a few suggestions via the board that hint towards the NSA setup. Thanks in advance.

 

IMO if you are using the stock cam stick with the SA rockers.It will be cheaper and easier to do.If you are going with a cam with lots of lift go with the NSA as it will be more stable at higher RPMs.Going NSA can get expensive quick if buying everything new.

 

BTW IF you want to upgrade later on a 7/16 stud, GMPP guideplates and NSA Pro Mags are the way to go, if not use something like the Hot Cam rockers.

Bret