LT1 Edit or Autotap or??? OBDII
Thread Starter
Registered User
Joined: May 2001
Posts: 420
From: Newburgh, IN
LT1 Edit or Autotap or??? OBDII
OBDII
Can LT1 edit be used as a scan tool? I don't need something that can just read codes, but can tell me all of my engine and sensor parameters. I know Autotap can do this, but if LT1 Edit can do the same thing, i will just get it instead of getting the scanner and later getting LT1 Edit. Thanks.
Can LT1 edit be used as a scan tool? I don't need something that can just read codes, but can tell me all of my engine and sensor parameters. I know Autotap can do this, but if LT1 Edit can do the same thing, i will just get it instead of getting the scanner and later getting LT1 Edit. Thanks.
Administrator
Joined: Nov 1998
Posts: 71,097
From: Hell was full so they sent me to NJ
Since you are OBD-II, there is no "scan" software bundled with LT1_Edit. The OBD-I version does include a version of pcmcomm, and can be upgraded to data log for extra cost. But they never came out with any "scan" option for the OBD-II version.
Registered User
Joined: Sep 1998
Posts: 8,319
From: US 1 Mile Marker 52 in the Florida Keys
check out www.obd-2.com
they sell a cable to plug your computer into the aldl port, and free software that reads all realtime sensor data and codes.
however i don't htink you can do any reprogamming with it (not sure). but the cables are only about $125 and the program is free.
they sell a cable to plug your computer into the aldl port, and free software that reads all realtime sensor data and codes.
however i don't htink you can do any reprogamming with it (not sure). but the cables are only about $125 and the program is free.
Registered User
Joined: Aug 2000
Posts: 586
From: Oklahoma City, OK
Originally posted by teke184
check out www.obd-2.com
they sell a cable to plug your computer into the aldl port, and free software that reads all realtime sensor data and codes.
however i don't htink you can do any reprogamming with it (not sure). but the cables are only about $125 and the program is free.
check out www.obd-2.com
they sell a cable to plug your computer into the aldl port, and free software that reads all realtime sensor data and codes.
however i don't htink you can do any reprogamming with it (not sure). but the cables are only about $125 and the program is free.
Registered User
Joined: Dec 2002
Posts: 752
Originally posted by LT4POWR
I wonder if you could just use this program with the LT1_Edit OBDII cable??? Anyone know???
I wonder if you could just use this program with the LT1_Edit OBDII cable??? Anyone know???
No you cant, LT1_edits cable wit hany scan tools, the cable interface is specific to LT1_edit and its flashing program.
IMO autotap is the way to go, its $199 and includes the cable
and is more user friendly than OBD2.coms free version.
Thread
Thread Starter
Forum
Replies
Last Post
stockssn2o
Parts For Sale
14
May 25, 2015 08:54 AM
