Help with codes please.
Thread Starter
Registered User
Joined: Apr 2002
Posts: 436
From: ontario,canada
Help with codes please.
I scanned the car with datamaster last night becasue I still have a part throttle miss/stumble I can't figure out.The ses light is NOT on.Here are the codes I got.
MALF13-Left o2 fail
MALF 48-Malf system fail
MALF66- A/c press sensor open/short
Can some one explain this it looks straight forward just want some feed back.Thanks!
Rob.
MALF13-Left o2 fail
MALF 48-Malf system fail
MALF66- A/c press sensor open/short
Can some one explain this it looks straight forward just want some feed back.Thanks!
Rob.
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
I guess you are OBD-I converted?
Just to be sure, you might clear the codes and see if they all return. You might have burned O2 wires, a poor power connection to the MAF (fairly common-check the pink wire for 12v with the key ON), poor connection/wiring to the a/c sensor or bad sensor.
As always, check fuses.
Just to be sure, you might clear the codes and see if they all return. You might have burned O2 wires, a poor power connection to the MAF (fairly common-check the pink wire for 12v with the key ON), poor connection/wiring to the a/c sensor or bad sensor.
As always, check fuses.
Thread Starter
Registered User
Joined: Apr 2002
Posts: 436
From: ontario,canada
Yes OBD1 converted. Sorry forgot to mention that the a/c is removed but I have never gotten that code before.I'll clear the codes and check fuses.Did you mean to check for power to maf sensor? Thanks Shoebox.
Rob.
Rob.
Thread
Thread Starter
Forum
Replies
Last Post
