cam kit?
Thread Starter
Registered User
Joined: Jan 2003
Posts: 156
From: NJ
cam kit?
What is a good place to buy and Hotcam kit,cc305, or cc306. I would like to go for a cc306, but i want to spend less than a grand for a kit. I would aprreciate any websites or places in NJ area with good deals on cam kits. Oh yeah and i want good mid to upper range torque and hp so does the hotcam have good mid to upper range? i know the cc305 and cc306 do.
Registered User
Joined: Sep 2002
Posts: 470
From: Gwinnet County, GA
www.racenet.net
this place has a kit for like $730 with gaskets n' stuff. I've heard some people complain about them though, so I'd ask around.
this place has a kit for like $730 with gaskets n' stuff. I've heard some people complain about them though, so I'd ask around.
Registered User
Joined: Jan 1999
Posts: 842
From: Paris, Texas
Registered User
Joined: Nov 2001
Posts: 241
From: Oakdale MN
I put hot cam in a 95, soggy bottom end, (could use gears) some mid and upper rpm increase but think the 305 would perform better, very slight idle. Tpis ZZ409 is WAY better doesnt give up too much at the bottom end and is probably twice as good up in RPM's. They will sell you all you need to install, think they get $875 but the cam is worth the extra $$
Banned
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Originally posted by pillagenburn
www.racenet.net
this place has a kit for like $730 with gaskets n' stuff. I've heard some people complain about them though, so I'd ask around.
www.racenet.net
this place has a kit for like $730 with gaskets n' stuff. I've heard some people complain about them though, so I'd ask around.
$800+ valvetrain order takes 3 weeks to get here and my rocker studs are used. then they tell me i'm a liar and so is my engine builder/mechanic and best friend.
www.cmotorsports.com
they are THE shieeeet. their cam kit prices rock and they are very knowegable. I suggest you give them a call
Registered User
Joined: Sep 2002
Posts: 397
From: Upstate SC
Yea, I'm completely turned off to racenet since hearing Trey's story a while back. It's a shame with their prices thought. But what they did to him is UNREDEEMABLE in my book; no excuse for that!! Worse than SLP customer service!!
Banned
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Originally posted by LT1derful
Yea, I'm completely turned off to racenet since hearing Trey's story a while back. It's a shame with their prices thought. But what they did to him is UNREDEEMABLE in my book; no excuse for that!! Worse than SLP customer service!!
Yea, I'm completely turned off to racenet since hearing Trey's story a while back. It's a shame with their prices thought. But what they did to him is UNREDEEMABLE in my book; no excuse for that!! Worse than SLP customer service!!
he got it the worse, wrong retainers/springs and dropped a valve
Registered User
Joined: Sep 2002
Posts: 397
From: Upstate SC
www.samtaylor.com
Go to parts. Call em toll free at that number and speak to Jason Cromer...he's DA MAN!!
Go to parts. Call em toll free at that number and speak to Jason Cromer...he's DA MAN!!
Thread
Thread Starter
Forum
Replies
Last Post
Smokn '94 Z
Drag Racing Technique
16
Aug 4, 2002 06:11 PM
Smokn '94 Z
Drag Racing Technique
12
Jul 28, 2002 02:38 AM