67 wiring schematic problem
67 wiring schematic problem
Ok heres the problem, i went from a 327, to 468. My battery is connected, there is no power to anything period. I tried to turn the lights on nothing. turn signals, anything inside out side the car does not work. how ever i touched the started bolt with a screw driver and it started turning.
I chased these 3 wires around, i tried touch the battery with a light tester, it works . Then i tried testing other wires every where. Nothing. I cant figure out where the problem is, and i do not know where the hot wire is. Where can i find a diagram on 67 camaro wire schematics?
I chased these 3 wires around, i tried touch the battery with a light tester, it works . Then i tried testing other wires every where. Nothing. I cant figure out where the problem is, and i do not know where the hot wire is. Where can i find a diagram on 67 camaro wire schematics?
It sounds like the fuse panel is getting 12v+. I would trace the wire from the starter (as the battery gets connected directly to the starter, and then there should be a wire from the starter to the fuse panel) to the fuse panel, and test the fuse panel to see if there is any 12v+ there. In regards to a diagram, you may to contact painless wiring, as they probably have original diagrams.
Hope this helps.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Magenta_Hearts
New Member Introduction
4
Mar 25, 2015 10:24 AM



