Will
summit part #: RMG-6901651
10-bolt, 8.5 in. ring gear, 4.10 ratio, ring and pinion set

Fit into an '82 camaro that currently has the stock rear-end

 

Nope. That is for the older sytle 10 bolt, like found on the 2nd gen Camaro/Firebird and 80's Caprices.

You need gears for a 7.5" or 7.625" 10 bolt rear.

 

you probably wouldn't want 4.10 gears anyway unless you are a serious racer or have greatly larger tires. Most canaro's have a 2.74 ratio rear end (or at least all the ones with a 700-R4 in them and some of the manuals).

 

Ok thank u,

I was asking for a friend cause i got the 4.10's for my 78 trans am to replace the 4.56's that were in there, but now i'm not so i just wanted to see if he could make use of them...