Has anyone ever used Accels cam on their TPI?
12-08-2002, 07:46 PM
#1
Registered User
Thread Starter
Join Date: Apr 2002
Location: New York
Posts: 282
Has anyone ever used Accels cam on their TPI?
305 TPI that is.....
Accel cam [#74211] 211/219 .503/.525 .536/.560 112deg
I have their double springs, 1.5 roller rocker arms and a T-5 tranny, Is this too big of a lift.
Accel cam [#74211] 211/219 .503/.525 .536/.560 112deg
I have their double springs, 1.5 roller rocker arms and a T-5 tranny, Is this too big of a lift.
12-09-2002, 08:06 AM
#2
Banned
Join Date: Mar 2001
Posts: 3,249
I used the 74219 in my 350 when it was a 350. It has 219 deg druation I/O, Final lift was .560 with 1.6 RR, 112 deg lobe sep. It needed a different stall torque converter which should not bother you. Also to optimize it, I needed the EPROM recalibrated.
For ERPOM recalibrations go to www.fasterproms.com and they will do a custom job based on readings from the car during runs.
For ERPOM recalibrations go to www.fasterproms.com and they will do a custom job based on readings from the car during runs.
Thread
Thread Starter
Forum
Replies
Last Post
ZBLKHELLRZR
Drag Racing Technique
4
08-18-2002 07:57 AM
Smokn '94 Z
Drag Racing Technique
12
07-28-2002 02:38 AM