123mph trap speeds. What rwhp does this equate to?
08-17-2002, 01:37 PM
#1
Registered User
Thread Starter
Join Date: Jun 1999
Location: The Haven, Fl
Posts: 972
123mph trap speeds. What rwhp does this equate to?
60 ft is around 1.85 on ET streets the eight is close to 100mph don't have the exact number w/ a average reaction time of .560-.590.
LS1 stage II heads/cam 224/227 114LSA .585lift/dyna tech headers/slp exh/ 3.89 rear on a 9".
This isn't my car but he's someone I've raced before and will race again in Sept. Him on ET's me on SZ50's he gets me out of the whole everytime naturally but I catch him by the 1/8 and hold steady slightly falling off at the very end. Stk rearend & 3.23's hurt me.
Previous 1/8's we've done my best 8.1 @ 91mph and his was 7.8 92mph but he's on ET streets. This was 2 months ago.
Thanks for any incite esp on rwhp figures.
------------------
93Zm6 Blk TT stk 3.23's
Engine mods:
Balanced & Blue printed 396 Forged Lunati internals, Stage II Heads, Taylor wires, NGK TR55's, Accel 300+ & coil, 95+ opticrap, AS&M 58mm TB, ATI damper, AFR Rev Kit, FLP's & Borla exhaust w/top flight corvette cockpit exhaust adj, Metco AFPR, Accel 30lb inj, Ed Wright Chip, 160 stat, Hurst Pro Shifter,
Mcleod Street twin & alum fly, TPIS 3.5 DS, T/A Cover w/ stud kit
Susp mods: Flowtech adj. TA, KB SFC& 3 PT STB, Eibach sportline springs, Bilsteins shocks, Hotchkis PHR & LCA w/ Spohn LCAB, Poly tranny mount, Suspension tech sway bars 35&25mm, Baer bump steer rods, Baer Track system 13"F 11.7"R drilled/slotted/zinc plated, steel braided lines
Cosm mods:
Ultra Z hood(funtional)K&N, G2 5" rear spoiler & front Gfx, Rytek headlights(oval version),DGmotorsports carbon fiber dual foglights, G2 world challenge wheels 17x9.5 Pwdr coated BLK, Falken 45 ZR17's 275/40, RK smoke signal covers, fire ext, chrome throttle cover, chrome fuse box, chrome LT1 badges, carbon fiber emblem
Interior: Corbeau Targa RS seats & Harness, G2 Harness Bar, RK Wht face gauge, G2 pedals & door sills,
Auto Lite Oil, Tranny temp guage, & FP guage
Future mods: Upper & Lower A-Arms, coilovers, revalved bilsteins
http://community.webshots.com/album/40511381WqPSWB
LS1 stage II heads/cam 224/227 114LSA .585lift/dyna tech headers/slp exh/ 3.89 rear on a 9".
This isn't my car but he's someone I've raced before and will race again in Sept. Him on ET's me on SZ50's he gets me out of the whole everytime naturally but I catch him by the 1/8 and hold steady slightly falling off at the very end. Stk rearend & 3.23's hurt me.
Previous 1/8's we've done my best 8.1 @ 91mph and his was 7.8 92mph but he's on ET streets. This was 2 months ago.
Thanks for any incite esp on rwhp figures.
------------------
93Zm6 Blk TT stk 3.23's
Engine mods:
Balanced & Blue printed 396 Forged Lunati internals, Stage II Heads, Taylor wires, NGK TR55's, Accel 300+ & coil, 95+ opticrap, AS&M 58mm TB, ATI damper, AFR Rev Kit, FLP's & Borla exhaust w/top flight corvette cockpit exhaust adj, Metco AFPR, Accel 30lb inj, Ed Wright Chip, 160 stat, Hurst Pro Shifter,
Mcleod Street twin & alum fly, TPIS 3.5 DS, T/A Cover w/ stud kit
Susp mods: Flowtech adj. TA, KB SFC& 3 PT STB, Eibach sportline springs, Bilsteins shocks, Hotchkis PHR & LCA w/ Spohn LCAB, Poly tranny mount, Suspension tech sway bars 35&25mm, Baer bump steer rods, Baer Track system 13"F 11.7"R drilled/slotted/zinc plated, steel braided lines
Cosm mods:
Ultra Z hood(funtional)K&N, G2 5" rear spoiler & front Gfx, Rytek headlights(oval version),DGmotorsports carbon fiber dual foglights, G2 world challenge wheels 17x9.5 Pwdr coated BLK, Falken 45 ZR17's 275/40, RK smoke signal covers, fire ext, chrome throttle cover, chrome fuse box, chrome LT1 badges, carbon fiber emblem
Interior: Corbeau Targa RS seats & Harness, G2 Harness Bar, RK Wht face gauge, G2 pedals & door sills,
Auto Lite Oil, Tranny temp guage, & FP guage
Future mods: Upper & Lower A-Arms, coilovers, revalved bilsteins
http://community.webshots.com/album/40511381WqPSWB
08-17-2002, 03:24 PM
#2
Registered User
Join Date: Nov 2000
Location: AZ
Posts: 1,148
ASSuming his car weighs ~ 3600 lbs., 123 mph should be ~ 460-480 rwhp.
------------------
'97 Z28 6 speed - Cayenne Red Metallic
CC305 - 112 LSA, Crane Gold 1.6 RRs, Crane 10308 springs, K&N CAI, SLP Shorties, custom offroad y-pipe, borla, Motive 3.73s - TA girdle & stud kit...
13.384 @ 107.42 - 2.186 60' and 90*
Don't question the great...just enjoy us
My '97 Z28
------------------
'97 Z28 6 speed - Cayenne Red Metallic
CC305 - 112 LSA, Crane Gold 1.6 RRs, Crane 10308 springs, K&N CAI, SLP Shorties, custom offroad y-pipe, borla, Motive 3.73s - TA girdle & stud kit...
13.384 @ 107.42 - 2.186 60' and 90*
Don't question the great...just enjoy us
My '97 Z28
08-17-2002, 03:26 PM
#3
Registered User
Join Date: Aug 2000
Location: Staten Island, New York, USA
Posts: 179
I know a guy from the track who runs a LS1 M6, with a LS6 head cam setup who has 420 RWHP He traps 117-120. 11.6's when he isn't breaking the rear. I'd guess you have atleast 440 RWHP,
Fred
------------------
1994 Z28, A4,
BEST 1/4 12.413@109.55
BEST 1/4 MPH 110.49
BEST 60' 1.668
BEST 1/8 7.884@86.35
BEST 1/8 mph 86.77
Race Weight 3600lbs
No new times with P&P heads Flow 239.4 INT 182.1 @525 lift, or
24lb SVO inj's...
Fred
------------------
1994 Z28, A4,
BEST 1/4 12.413@109.55
BEST 1/4 MPH 110.49
BEST 60' 1.668
BEST 1/8 7.884@86.35
BEST 1/8 mph 86.77
Race Weight 3600lbs
No new times with P&P heads Flow 239.4 INT 182.1 @525 lift, or
24lb SVO inj's...
08-17-2002, 04:18 PM
#4
Registered User
Join Date: Nov 2000
Location: AZ
Posts: 1,148
Those 1/8 mile time/mph don't match up to the 123 mph trap speed. Given those 1/8 mile times/mph, I'd say ~ 350-360 rwhp.
------------------
'97 Z28 6 speed - Cayenne Red Metallic
CC305 - 112 LSA, Crane Gold 1.6 RRs, Crane 10308 springs, K&N CAI, SLP Shorties, custom offroad y-pipe, borla, Motive 3.73s - TA girdle & stud kit...
13.384 @ 107.42 - 2.186 60' and 90*
Don't question the great...just enjoy us
My '97 Z28
------------------
'97 Z28 6 speed - Cayenne Red Metallic
CC305 - 112 LSA, Crane Gold 1.6 RRs, Crane 10308 springs, K&N CAI, SLP Shorties, custom offroad y-pipe, borla, Motive 3.73s - TA girdle & stud kit...
13.384 @ 107.42 - 2.186 60' and 90*
Don't question the great...just enjoy us
My '97 Z28
08-18-2002, 07:57 AM
#5
Registered User
Thread Starter
Join Date: Jun 1999
Location: The Haven, Fl
Posts: 972
Yeah I know the 1/8th don't match. But that was from 2 months ago too though. The times listed are from last wk in the 1st para.
Correction on his heads though LS6 Stage 2's. Katech did his head and cam setup and told him 480 fly on his Firehawk. Don't have dyno's here so we'll never know for sure. But I know it's more than that.
I won't have no times til Sept but I'll post 'em when I get 'em.
Just based on my 1/8th where do I stand? Forgot to mention his time 11.85/11.76 nothing lower though.
Thanks guys!
[This message has been edited by ZBLKHELLRZR (edited August 18, 2002).]
Correction on his heads though LS6 Stage 2's. Katech did his head and cam setup and told him 480 fly on his Firehawk. Don't have dyno's here so we'll never know for sure. But I know it's more than that.
I won't have no times til Sept but I'll post 'em when I get 'em.
Just based on my 1/8th where do I stand? Forgot to mention his time 11.85/11.76 nothing lower though.
Thanks guys!
[This message has been edited by ZBLKHELLRZR (edited August 18, 2002).]
Thread
Thread Starter
Forum
Replies
Last Post