Fikse Mags on a TA
Did you check Brent Franker's "Appearance" pages:
http://www.bfranker.badz28.com/appearance/
Click "Firebird" in the upper right corner, then "Wheels". There's at least some FM5's:


http://www.bfranker.badz28.com/appearance/
Click "Firebird" in the upper right corner, then "Wheels". There's at least some FM5's:


Thank Fred, unfortunately Brett didn't have any on his site, the mags is just a less used wheel I guess. When they go on I'll post some pics and send them also to Brett.
Last edited by neil350; Aug 12, 2008 at 04:00 PM.
Not sure where the cheapest prices are, but here's one source:
http://customwheel.com/custom_wheels...aa32f28934eda7
Prices range from $750 per wheel for a 17x7.5" to $1,200 per wheel for an 18x10". So figure about $4,000 for a set.
http://customwheel.com/custom_wheels...aa32f28934eda7
Prices range from $750 per wheel for a 17x7.5" to $1,200 per wheel for an 18x10". So figure about $4,000 for a set.
Not sure where the cheapest prices are, but here's one source:
http://customwheel.com/custom_wheels...aa32f28934eda7
Prices range from $750 per wheel for a 17x7.5" to $1,200 per wheel for an 18x10". So figure about $4,000 for a set.
http://customwheel.com/custom_wheels...aa32f28934eda7
Prices range from $750 per wheel for a 17x7.5" to $1,200 per wheel for an 18x10". So figure about $4,000 for a set.
Thread
Thread Starter
Forum
Replies
Last Post
Catmaigne
Parts For Sale
0
Jul 14, 2015 05:17 PM



