If I can figure out what in the hell is up with my car tonight I planned on going street racing and videotaping it. I will be at the car club tonight to get a group of people to come to film....hate to be an *** but NO EURO ****(hondas with neon lights,stock eclipse with giant wing etc need not apply). I won't be there long so look for a white T/A with a black pinstripe and let me know your interested and after maybe 30 minutes or so we can go out "somewhere" and film. I was hoping to post this footage online to let everybody know who is who and to give some of us a chance to do a little bit of showing off
see yall tonight,
Rick
ps. do not post recommendations for race locations, email me any ideas you got, thanks.

 

Yeah, I have a 1996 Red Z28 M6. Its mostly stock right now, but it won't be by the time I get it us to A&M this fall. I am planning of racing at Texas World Speedway on weekends. Hey, Any CTs email me.

 

Tony , "THAT" was one hell of a race !!! I really enjoyed it !!! It's GOOD to race a friend and not have any hard feelings !!!! I'm gonna get some BFG drag radials and have them ready for ya next time !! We both spun pretty good , and it's always been a good race !!! I'm proud just to get an even match against the famous Tony Sheppard !!! It gives me a better idea of what my car "COULD" run if properly set up , but that race was "AWESOME" , my car performed flawlessly , and our race is going to be the "TALK" of the town for a while !!! So next time we'll run both ways , and that will give me an indication of how I could do out of the hole. I'll probably put the 1.6 RR's on there before we go again and pick up a few ponies , and if we both run on drag radials , it'll be a closer race , and we "MIGHT" have to try the spray !!! Good seein ya again , and you're car sounded Real good !!! Keep me posted , and some time I'll have to drive up to you're area and you can show me all the HOT SPOTS !! Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

 

Are people going up to Academy also on Sunday or is it just a Wed. night thing?

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

 

Also does anybody know if there are any car shows in town like at Sonic for the F-Bodies, or anything at all?

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, BMR E-Brace, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

 

The Aggie car club has been aproved to meet @ the O'Rielly's in Bryan on Wed. nite. Check with Rick or Grant to make sure cuz the College Station O'Rielly's has been OK'd also , but the parking lot there is kinda SMALL !! So Jordan ( The Manager @ O'Rielly's ) said that the Bryan store has more room and the overflow could go into the Billiards room parking lot. But the OK has been given , just check with Grant or Rick to verify !! Later , Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

 

I think we're sticking to the Academy lot for now. I don't see a reason to move to such a tiny lot. If Jason's Deli wants us to move then we will.

 

Thats great Ed. I will be at the Bryan lot on Wednesdays from now on. We will eventually get kicked out of the Academy one so we might aswell. Plus we still have somewhat an easy acess to the highway.
All we need is to somehow make the "wednesday night meet" official so we can start to boot the jack asses who ruin things for everyone else.
Rick

 

I am gonna try and swing out this week. I have only been out once since I got rid of my 96 Camaro. Well, I got another project underway now so beware everyone..j/k. Ed, if I get to a stuck point, you wanna throw in a few pointers for me? Email me and I will let you know more of what I am gonna do if you have time to help. It will be a suprise for the rest of u.

 

Jeremy , I'll be glad to help !! I'm a horsepower fanatic always looking for that last pony to pull out !!! I'm always at Hastings from 8:30 to 10:00 , and if Ya'll are going to start meeting at O'Reilly's , thats right on my way home , so both meets will be easy for me !! I'm anxious to hear what you've got up your sleeve !!?? See Ya'll tomorrow nite , Ed

------------------
New Sig. !!! 434 Small Block is now in the car !!! Ross lightweight flat top racing pistons ,( 11.5 Compression ), 6in. 4340 rods w/ARP wavelock bolts , 4340 Forged non-twisted steel crank , Solid Roller cam-260 Degrees ( @ .050 ) 270 on the exhaust , .610 lift w/1.5 Rockers. Fully ported Alum. heads , Ported Victor Intake , Barry Grant Carb. and three stages of N.O.S. ( 350 H.P. )Lots of shiny stuff and still a daily driver !!!

 

I'm up there alot visiting my girlfriend, and friends I have that go there. I had a run with a black 93-96 Z28 last time I was there, on George Bush, was that anyone on here?

------------------
:Justin:
97'Z28 Convertible A4
Z Style Ram Air Hood(functional)
!MAF Ported
!TB Coolant Bypass
160 thermo.
SLP Loud Mouth
TB Air Foil
CC "304" cam
CC 1.6RR
CC springs
Hardened pushrods
Taylor Spiro-Pro 8mm Wires
NGK TR55 plugs
HPPIII W/PowerScan card
Hotchkis STB
Hotchkis LCA's
ZR1 17X9 rims
Potenza 285/40ZR17 Tires
Custom plates HFB-Z28
!Worth 20rwhp!

Waiting to be installed: TransGo shift kit, 3.42's and an Eaton Posi.

"Trying is the first step towards failure." Homer Jay Simpson

Member of the Houston F-Body's

Pic's of my ride

 

Is everyone going up to academy tonight?

------------------
'97 Trans Am w/ G2 cold air ind., power pulley, cags, LT4 knock mod., egr. mod, fuel mod.,valve breather,b&m ripper, Borla, 160 deg. therm., cross-cut rotors, silver emblems all reflective, white face gauges, custom painted white accent interior, Star Spec Stage III clutch, G2 lowering springs, BMR E-Brace, Chrome 17x9.5 ROH ZS w/G-Force KDW's

See it at http://photos.yahoo.com/highhpta

 

No one wants your POS heads Brook.......

 

Hey, on Wednesday, did everyone go to Academy or what? I wasn't there cause I was checking out some por.... errr.... sleeping for work at 6am the next day.

 

I just might go work there, I guess thats probably the only job I could show up to the next day hung over like a bitch and not get fired from LOL
Rick