Keyless entry programming
Registered User
Joined: Sep 2004
Posts: 2,595
From: Lenexa, KS
Re: Keyless entry programming
shbox.com
Basically, take a paper clip, unbend it... connect the two terminals... press the lock button, take out the paper clip.
(thats if your car came with power locks and you buy the right remote for it off ebay)
Basically, take a paper clip, unbend it... connect the two terminals... press the lock button, take out the paper clip.
(thats if your car came with power locks and you buy the right remote for it off ebay)
Registered User
Joined: Dec 2005
Posts: 78
From: Raleigh, NC
Re: Keyless entry programming
Here's what the '96 owner's manual says:
-Turn the ignition switch from the RUN position to the off position. This will disarm the Vehicle and Content Theft-Deterrent/Alarm System.
-Remove the RADIO fuse. This fuse is located in the main fuse block, located on the left side of your instrument panel.
-Turn the ignition switch from the OFF to the RUN position three times quickly (within five seconds.) The vehicle will respond by locking the doors, unlocking the driver's doors and releasing the hatch. Your transmitter is now ready to match your vehicle.
-Press and hold the LOCK and UNLOCK buttons on the transmitter for 15 seconds. The vehicle will respond as in step 3.
-When you have finished matching your transmitter, replace the RADIO fuse.
-Turn the ignition switch from the RUN position to the off position. This will disarm the Vehicle and Content Theft-Deterrent/Alarm System.
-Remove the RADIO fuse. This fuse is located in the main fuse block, located on the left side of your instrument panel.
-Turn the ignition switch from the OFF to the RUN position three times quickly (within five seconds.) The vehicle will respond by locking the doors, unlocking the driver's doors and releasing the hatch. Your transmitter is now ready to match your vehicle.
-Press and hold the LOCK and UNLOCK buttons on the transmitter for 15 seconds. The vehicle will respond as in step 3.
-When you have finished matching your transmitter, replace the RADIO fuse.
Registered User
Joined: Aug 2002
Posts: 1,719
From: Bay Area, CA
Re: Keyless entry programming
Originally Posted by Chevamaro
Here's what the '96 owner's manual says:
-Turn the ignition switch from the RUN position to the off position. This will disarm the Vehicle and Content Theft-Deterrent/Alarm System.
-Remove the RADIO fuse. This fuse is located in the main fuse block, located on the left side of your instrument panel.
-Turn the ignition switch from the OFF to the RUN position three times quickly (within five seconds.) The vehicle will respond by locking the doors, unlocking the driver's doors and releasing the hatch. Your transmitter is now ready to match your vehicle.
-Press and hold the LOCK and UNLOCK buttons on the transmitter for 15 seconds. The vehicle will respond as in step 3.
-When you have finished matching your transmitter, replace the RADIO fuse.
-Turn the ignition switch from the RUN position to the off position. This will disarm the Vehicle and Content Theft-Deterrent/Alarm System.
-Remove the RADIO fuse. This fuse is located in the main fuse block, located on the left side of your instrument panel.
-Turn the ignition switch from the OFF to the RUN position three times quickly (within five seconds.) The vehicle will respond by locking the doors, unlocking the driver's doors and releasing the hatch. Your transmitter is now ready to match your vehicle.
-Press and hold the LOCK and UNLOCK buttons on the transmitter for 15 seconds. The vehicle will respond as in step 3.
-When you have finished matching your transmitter, replace the RADIO fuse.
Thread
Thread Starter
Forum
Replies
Last Post
