can i beat a mach 1? (lt1)
Originally posted by NewbieWar
Mach1's are just about as fast as lt1's are stock maybe a tad faster...
so if ur engine is tired it may not win but chances are if ur stock u'll stick w/ him...
Mach1's are just about as fast as lt1's are stock maybe a tad faster...
so if ur engine is tired it may not win but chances are if ur stock u'll stick w/ him...
Originally posted by Sephiroth
I love people who have no clue what they are talking about
I love people who have no clue what they are talking about
like u for example?Mach 1 info as follows
Engine:
Modular 4.6 Liter (281 CID)
32 Valve, DOHC
Compression Ratio: 10.1:1
Horsepower: 305
Torque: 320 ft/lb
Rear end gear ratio: 3.55:1
Dual 57mm Throttle Bodies
less torque, the car weights more, wont have the high end that a stock lt1 will have due to gears.
here is the slowest mach1 speed ive found... looks like a bad run
2.375, 14.710 @ 96.69
the fastest stock i see is
2.038, 13.262 @ 105.78
which i will retract my statement, thats a slow 60 second time for a 13.2
here is what the auto gets
14.29_ @ 98.42 doesnt mention 60 sec time
On car-stats.com it says 13.8 in the 1/4. Personally the fastest(also the only one) i have seen on one was a 13.7x but i don't know if that was a stock one or not. His exhaust was pretty loud though.
But car-stats.com also says a 2001 z28 only gets a 13.9 so i don't know how accurate they are.
But car-stats.com also says a 2001 z28 only gets a 13.9 so i don't know how accurate they are.
Last edited by drewstealth; Oct 16, 2003 at 09:37 PM.
Originally posted by power302
03 Cobra fastest
03 mach1 comparable to 98-02 F-body Ls1
99-03 Gt comparable to 93-97 f-body lt1
5.0 stangs comparable to 350 tpi 3rd gen F-bodys
03 Cobra fastest
03 mach1 comparable to 98-02 F-body Ls1
99-03 Gt comparable to 93-97 f-body lt1
5.0 stangs comparable to 350 tpi 3rd gen F-bodys
from all the ones i race its some what even throught the quarter mile but after that they tend to fade back quickly. just my .02
Originally posted by NewbieWar
like u for example?
Mach 1 info as follows
Engine:
Modular 4.6 Liter (281 CID)
32 Valve, DOHC
Compression Ratio: 10.1:1
Horsepower: 305
Torque: 320 ft/lb
Rear end gear ratio: 3.55:1
Dual 57mm Throttle Bodies
less torque, the car weights more, wont have the high end that a stock lt1 will have due to gears.
here is the slowest mach1 speed ive found... looks like a bad run
2.375, 14.710 @ 96.69
the fastest stock i see is
2.038, 13.262 @ 105.78
which i will retract my statement, thats a slow 60 second time for a 13.2
here is what the auto gets
14.29_ @ 98.42 doesnt mention 60 sec time
like u for example?Mach 1 info as follows
Engine:
Modular 4.6 Liter (281 CID)
32 Valve, DOHC
Compression Ratio: 10.1:1
Horsepower: 305
Torque: 320 ft/lb
Rear end gear ratio: 3.55:1
Dual 57mm Throttle Bodies
less torque, the car weights more, wont have the high end that a stock lt1 will have due to gears.
here is the slowest mach1 speed ive found... looks like a bad run
2.375, 14.710 @ 96.69
the fastest stock i see is
2.038, 13.262 @ 105.78
which i will retract my statement, thats a slow 60 second time for a 13.2
here is what the auto gets
14.29_ @ 98.42 doesnt mention 60 sec time
Um, no like you dumbass. A Mach1 will wipe your stock LT1. I'll run you in my stock GT.
Again, you have no clue, try again.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
heavenly_six
Parts For Sale
0
Dec 10, 2014 12:23 AM



