For Sale: 454cid Big Block Chevy
For Sale: 454cid Big Block Chevy
I'm selling a high performance 454cid big block Chevy. For those of you who remember my Purple '97 Z28, it's that motor.
It's a Gen VI, factory roller cam motor. It has the following:
7.4 Liter (454cid) Gen VI Chevrolet big block
9.35:1 Compression ratio
Bore: 4.250"
Stroke: 4.00"
~475hp @ 5200RPM (Desktop Dyno)
~530ft-lbs @ 2500RPM (Desktop Dyno)
Scat series 9000 crank
Scat forged HD I-beam rods with cap screws and locating dowels
Full Floating forged SpeedPro 4.250" pistons
GM Performace Parts ZZ502 hydraulic roller camshaft
-Duration @ 0.050": 224' intake, 234' exhaust
-Lift: 0.527" intake, 0.544" exhaust
Edelbrock Performer RPM Aluminum Heads
-Valves: 2.19" intake, 1.88" exhaust, swirl polished
-110cc combustion chambers
-290cc intake runners
Edelbrock Performer RPM dual plane intake manifold
Speed Demon 750cfm carbuerator
Mallory Uni-lite distributor
MSD Coil
Taylor spiro-pro 8.5mm wires
GM single roller timing chain
Moroso electric water pump
Summit racing 1.7:1 roller rockers
Custom (by me!) 2" primary headers for 4th Gen Camaro
Engine is blueprinted and balanced to 8000RPM
I'm also including a Holley "Red" electric fuel pump since the GEN VI BBC doesn't have a fuel pump boss.
I spent over $10K to build it, and I'm asking $4500 obo. I pulled it out last year in hopes of finding a 2nd gen Camaro to put it in, but I've sort of gotten into sailboats so i need to sell it to help buy equipment for my boat.
Pictures are located here:
http://home.bellsouth.net/p/s/commun...iew=thumbs&ck=
Thanks
-Dave C. '97 Z28
Interested parties please email me at dcruicks@harris.com and I'll give you my phone number.
It's a Gen VI, factory roller cam motor. It has the following:
7.4 Liter (454cid) Gen VI Chevrolet big block
9.35:1 Compression ratio
Bore: 4.250"
Stroke: 4.00"
~475hp @ 5200RPM (Desktop Dyno)
~530ft-lbs @ 2500RPM (Desktop Dyno)
Scat series 9000 crank
Scat forged HD I-beam rods with cap screws and locating dowels
Full Floating forged SpeedPro 4.250" pistons
GM Performace Parts ZZ502 hydraulic roller camshaft
-Duration @ 0.050": 224' intake, 234' exhaust
-Lift: 0.527" intake, 0.544" exhaust
Edelbrock Performer RPM Aluminum Heads
-Valves: 2.19" intake, 1.88" exhaust, swirl polished
-110cc combustion chambers
-290cc intake runners
Edelbrock Performer RPM dual plane intake manifold
Speed Demon 750cfm carbuerator
Mallory Uni-lite distributor
MSD Coil
Taylor spiro-pro 8.5mm wires
GM single roller timing chain
Moroso electric water pump
Summit racing 1.7:1 roller rockers
Custom (by me!) 2" primary headers for 4th Gen Camaro
Engine is blueprinted and balanced to 8000RPM
I'm also including a Holley "Red" electric fuel pump since the GEN VI BBC doesn't have a fuel pump boss.
I spent over $10K to build it, and I'm asking $4500 obo. I pulled it out last year in hopes of finding a 2nd gen Camaro to put it in, but I've sort of gotten into sailboats so i need to sell it to help buy equipment for my boat.
Pictures are located here:
http://home.bellsouth.net/p/s/commun...iew=thumbs&ck=
Thanks
-Dave C. '97 Z28
Interested parties please email me at dcruicks@harris.com and I'll give you my phone number.
Re: For Sale: 454cid Big Block Chevy
I put a 355 in it. I'm probably going to sell the car as well. I'm just not into it anymore.
-Dave C. '97 Z28
-Dave C. '97 Z28
Last edited by Dave C. '97 Z28; Aug 3, 2005 at 01:04 PM.
Re: For Sale: 454cid Big Block Chevy
did Pat call you?
sent him link & info.
he wants a BBC to play with while still driving his other 3 BBC cars...
ask him what he did to his Monte Carlo roof....looks good...
sent him link & info.
he wants a BBC to play with while still driving his other 3 BBC cars...
ask him what he did to his Monte Carlo roof....looks good...
Thread
Thread Starter
Forum
Replies
Last Post
Doug Harden
Automotive News / Industry / Future Vehicle Discussion
11
Jul 14, 2002 04:31 PM



seems like her name was zena....
