I have some stuff on my front clip that i have no idea what it is(bought the car used), and i have not been able to get it off. It looks really bad. Im hoping rubbing compund will help, but im also afraid that it will hurt the paint. Any advice or oppinions are greatly appreciated.

Im not really sure what exactly rubbing compound is, but i have heard about it. Thanks.

 

I'd try a clay bar first. Rubbing compound is very abrasive. If not used properly, it can remove paint pretty quick.

 

tryed clay, didnt work. might try it again though.

 

Try polishing compound. Someone told me once its not as abrasive as rubbing compound. Its worked great for me a few times

------------------
97 Z-28 30th ANNIV. EDITION(white w/ orange stripes),T-TOPS,A4 3.23 REAR MODS= MTI COLD AIR INDUCTION,FLOWMASTER,3in CUT-OUT, MAF DESCREENED,SLP AIR FOIL,TB BYPASS,160stat,LT-4KM,EDELBROCK HEADERS W/ GUTTED CATS,02 SIMMS,RK SPORT 8MM WIRES,NGK TR-6's,N20 WORKS 150 SHOT W/REMOTE OPENER,AUTOMETER GUAGES,20% TINT,BMR STB(Orange),SFC'S AND ADJ. PANHARD BAR(orange)32mm & 21mm 1le sway bars,NEON UNDERBODY KIT(ORANGE) WHITE SS RIMS 17X9.5 F & 17X11R
PLATE= H8 2LUZ

To be installed SS hood, 3.73s