heads, cam, intake, TB, injectors
Thread Starter
Registered User
Joined: Sep 2004
Posts: 13
heads, cam, intake, TB, injectors, posi, converter, etc
All of the listed parts where removed from my 1996 LT1 Firebird Formula when I did a heads and cam swap last spring and had an odometer reading of 65k miles. Realistically with this low mileage they're very good items. All of the prices are negotiable. I live in south east Michigan and will need your zip code to calculate shipping costs... or you can pick them up.
I have a complete set of LT1 aluminum cylinder heads... with valves, springs, locks, retainers, studs, and 1.5:1 rockers. They have approx 65k miles on them. I cleaned them up and degreased the heads. These heads have never been ported or decked. $300 for the complete pair (negotiable) I can reduce price if don't want certain items.
Powder coated LT1 red intake manifold. Never been ported or decked. Will mate perfectly and seal. I powder coated them after I removed them. It looks brand new!!! (except for the inside) $90 (negotiable)
24lb injectors... $50
LT1 cam shaft 0.447/0.459 valve lift @ 0.050”
205/207 duration @ 0.050”
lobe separation 117 degrees = $100
LT1 timing chain and gears/ sprockets $50.00
pushrods = $30
48mm throttle body w/ "Grand Sport" top cover plate. This cover plate is the same plate used in the LT4 corvette. $100
Cylinder head/ intake bolts = $10
Or I can give a package deal on everything for $600. I have digital pics, but not a URL to post them. I can send pics upon request.
Thanks for looking
Adam
p.s.
I also have a 10 bolt posi rear end w/ 2.73 gears available and a Vigilante torque converter w/ 2800 RPM lock up... $100 each
p.p.s. mix and match items as you want
I have a complete set of LT1 aluminum cylinder heads... with valves, springs, locks, retainers, studs, and 1.5:1 rockers. They have approx 65k miles on them. I cleaned them up and degreased the heads. These heads have never been ported or decked. $300 for the complete pair (negotiable) I can reduce price if don't want certain items.
Powder coated LT1 red intake manifold. Never been ported or decked. Will mate perfectly and seal. I powder coated them after I removed them. It looks brand new!!! (except for the inside) $90 (negotiable)
24lb injectors... $50
LT1 cam shaft 0.447/0.459 valve lift @ 0.050”
205/207 duration @ 0.050”
lobe separation 117 degrees = $100
LT1 timing chain and gears/ sprockets $50.00
pushrods = $30
48mm throttle body w/ "Grand Sport" top cover plate. This cover plate is the same plate used in the LT4 corvette. $100
Cylinder head/ intake bolts = $10
Or I can give a package deal on everything for $600. I have digital pics, but not a URL to post them. I can send pics upon request.
Thanks for looking
Adam
p.s.
I also have a 10 bolt posi rear end w/ 2.73 gears available and a Vigilante torque converter w/ 2800 RPM lock up... $100 each
p.p.s. mix and match items as you want
Last edited by LT4ever; Oct 7, 2004 at 12:53 PM. Reason: updated title
Thread Starter
Registered User
Joined: Sep 2004
Posts: 13
Re: heads, cam, intake, TB, injectors
Sorry folks, I misspoke. The torque converter is a Midwest Converter, not a vigalante. I have all original receipts and paper work and original box. All the other specs about the verter remain the same. The P/N is G244-LT1. They have a website at www.raceconverters.com
Sorry for the mistake. (Al, call me or email and let me know what you want to do!)
Sorry for the mistake. (Al, call me or email and let me know what you want to do!)
Thread
Thread Starter
Forum
Replies
Last Post
Rich_z28
Car Audio and Electronics
3
Aug 29, 2002 10:44 PM