question about placement of gauge/filter
12-08-2003, 11:11 AM
#1
Registered User
Thread Starter
Join Date: Sep 2001
Location: Bel Air, MD, USA
Posts: 47
question about placement of gauge/filter
I have the TNT f1 kit.
In the instructions, it shows the pressure guage coming directly off the bottle nut, then the 5" line, then the filter, then the mainline.
However, the guage DOES NOT fit off the bottle nut...it will work however off the filter.
Would it matter that instead of doing "bottle/guage/line/filter/mainline" I do "bottle/line/filter/guage/mainline"
I tried all possibilities, and this is the only set up that will work...I am using the guage that comes with the kit instead of a nitrous guage in the cockpit...
thanks
In the instructions, it shows the pressure guage coming directly off the bottle nut, then the 5" line, then the filter, then the mainline.
However, the guage DOES NOT fit off the bottle nut...it will work however off the filter.
Would it matter that instead of doing "bottle/guage/line/filter/mainline" I do "bottle/line/filter/guage/mainline"
I tried all possibilities, and this is the only set up that will work...I am using the guage that comes with the kit instead of a nitrous guage in the cockpit...
thanks
Thread
Thread Starter
Forum
Replies
Last Post
dluna333
Suspension, Chassis, and Brakes
15
03-13-2015 12:30 PM
jasonduaine
LS1 Based Engine Tech
3
03-07-2015 09:44 AM
Hurin
Suspension, Chassis, and Brakes
4
12-13-2014 07:38 PM