I know an NX kit is awesome stuff but i am still wary about the single nozzle being poked into my intake system. Any way around this? one nozzle cant seem to flow as well as say TNT's kit, which is more than the NX kit. Wont the nozzle only spray on to one side of the motor? ive already had an NX kit where the fuel line was leaking so i ended up selling it to a kid with a prelude. I wanted the TNT kit for a while but I would like to somewhat hide the kit this time and that is impossible with the TNT kit. So NX users.......woo me.

 

nothing's wrong with NX. you can make a hole under the intake elbow, which will be hidden. poke the hole right in the middle. as for me. i made my hole on the left side of the intake elbow.....works fine....

 

The single nozzle works just fine in the elbow area. it won't spary on just one side of the intake. Cause the NX requires that the nozzle be 6"in. away from the t/b so it can atomize into the intake.

Vinny

 

uh oh, my nozzle is about 2" away from the TB, still working fine for now on the 150 shot.

 

My kit was a NX kit and it was hidden.I mounted the solinoids on the rear fire wall and the nozzle under the elbow.Then I ran the lines in wire loom. Now Im going NX Direct Port.