What do I need to do to have the bottle pressure guage located in the driver area? Is the remote electrical guage set-up from NX the only option, or can a regular pressure guage be plumbed into the driver area??
Thanks!

 

Thats what I got..

 

i have an Autometer 2-5/8" guage in my center vent. it's a mechanical guage and comes with a restrictor fitting that has to be used.

No leaks,and it's fine.

 

How did you hook it up? Does the guage come w/ instructions for the remote mount?
Thanks!

 

All you need is a "tee" in the main nitrous line, put the restriction fitting that Dirk mentions on the side outlet of the tee, and run a -3AN braided S/S line into the passenger compartment, to the gauge. Not sure where you can mount it on you Z.... the Formula/TA's have a ready made location....

Center A/C vent mounting

AutoMeter also make an electronic nitrous pressure gauge, that has a sender you mount somewhere on the main line, and simply run the wires into the passenger compartment.

 

The gauge uses a -4an fitting

 

Thanks for all the advice. This will save me from buying the electric NX unit and still be able to monitor pressure in the driver's area.
Thanks!

 

God fred that must be brutal the all mighty Radio delete mod, but yea i definatly agree i wish camaros had the vents there.