Cam is in already, nice seat of the pants gain. I'm getting it dynotuned later this week and going to maple grove on friday if all goes as planned.

 

I'll stick with good shorties, and some gears, 4.10's baby!!!

 

Is that tuned at all?

 

I'm tuned

Awsome tune!!!

 

Nice torque.

What did you lose (if any) at your low end? Did the torque curve stay flat?

 

Gotta go grab the sheet, i'll post it l8ter.

 

Nice #'s!

 

Here are the numbers:

RPM: POWER: TQ:

2400 25.9 56.6
2500 138.9 291.9
2600 144.9 292.6
2700 153.8 299.1
2800 162.2 304.2
2900 169.8 307.6
3000 178.2 311.9
3100 186.2 315.4
3200 194.0 318.5
3300 202.2 321.9
3400 210.4 325.0
3500 218.3 327.6
3600 226.8 330.9
3700 236.0 335.0
3800 244.6 338.0
3900 253.5 341.4
4000 261.7 343.6
4100 268.8 344.3
4200 275.3 344.3
4300 282.1 344.6
4400 288.1 343.9
4500 293.2 342.2
4600 299.4 341.8
4700 303.6 339.2
4800 308.6 337.7
4900
5000 314.7 330.6
5100 318.2 327.7
5200 322.8 326.0
5300 327.6 324.6
5400 330.9 321.8
5600 336.3 315.4
5700 337.2 310.7
5800 338.7 306.7
6000 340.4 298.0
6100 336.8 290.0
6300 316.9 264.2
6400 290.2 238.1
6600 163.6 130.2

These XE cams sure drop off after the 6000 rpm range. I'm still happy. Time for heads.

 

97bowtie, are those track #s in your sig with your cam? NiteRider, you should definatly get some lts. I bet you would pull 350rwhp, also those are some nice low rpm #s for that big of a cam.

 

Mine doesn't.. Well, not anymore . Comp R lifters fixed that problem. What lifters are you running?

 

Yup thats what a lot of T56 guys put down with that cam.

Good numbers.

 

nice!