I was doing an auto to manual swap when the M6 fell through and I didn't get it. Sooo, I put another auto back in.

Anyway, I put everything back together....shifter and column and dash and went to start it up and it won't turn over. I get lights and the dash comes to life but the starter is not engaging (or even making noise) like there's a kill switch or something.

I did not disconnect the battery during the swapping. (I know, that was dumb).

I did'nt get a remote with my forth hand Z so don't know if there's a kill switch or an anti theft device.

Someone out there has had this happen....any hints would be greatly appreciated.

 

On the shifter assembly, there is a solenoid and switch, make sure they are hooked up properly and try it again.

 

That was it....DOH! Thought I had that one plugged in...teach me to do mechanical work after dark.

Thanks