i have a set of 29.5-10.5-15 m/t drag slicks nvr used from some guy today and i was wondering if the would fit under my 93 formula??? any ideas will help...

thanks

 

28" is pretty much the practical limit without body work on the outline of the wheel opening. I ran 28x11.5-15 QTP's, and they grew enough at 120+mph trap speeds to start rubbing on the sheet metal at the front of the wheel opening. Moving the axle back 1/4" minimized the problem, or at least they rubbed on the rubber bumper cover instead.

Just went to 28x10.5-15W ET Drags, and have taken at least 1" off the bumper cover, and need to take maybe 1/2" more. Click on the "Trailer Queen....." link below to see the fitment.

Here is a 29.5 on a 30th SS convertible, and it took significant body work to the fenders and bumper cover:

Pic #1

Pic #2

If you go for the 29.5's, you better have some pretty steep gears.... I'm running 4.11's on a 5K stall.

 

thanks well they are for sale real cheap if u know aybody in in va area....