Hey guys. I know, beat around subject.

I'm looking for a set of wires to work with my Hooker LTs.

I would like to get something that will work Over the Valve cover, but REALLY don't want to make my own.

I have an MSD Coil, Digital 6 box and am gonna buy a new GM opti probably as well as new NGK TR55 plugs. Its a bolton car with stock longblock.

Thanks guys,

Igor.

 

Elite Spark Plugs was one of the only companies that I know of that make pre-made over-the-valve cover wires. However, because of their service issues, they have accumulated a very bad reputation in a short time. Alot of people just buy the MSD or Taylor kits and make their own. It isn't too difficult and you can at least cut the wires to the exact dimensions that you want.

 

Thunder racing makes a nice OTVC kit comes with everything you need, even the crimping tool.

What it basicly is is a universal Taylor spyro pro HEI 90 degree boot set of wires, a set of valvecover mounted wire brackets, a set of LT1 specific opti boots and terminals, and a crimping tool.

 

Dont be afraid of making your own wires. It's not hard at all.