What oil pump would be best for a forged 355. And are the oil pump drive the same as the older small blocks? I looking to get the metal driveshaft to get rid of the plastic sleeve. nothing was wrond with the factory pump just thought I would raplace it since the motors out. It only had 105k miles on it when it was pulled and had good oil pressure.

 

https://www.camaroz28.com/forums/lt1...cement-862810/

Scroll down to posts 29 and 30.

 

Do Not Reply

 

I would also consider reusing the stock pump and maybe just putting a high pressure spring in it.