Stock-headed CC305 - New Best - Video
Stock-headed CC305 - New Best - Video
I went out to Firebird last night with hopes of running a 12.5. I didn't quite get there, but I got pretty close.
My previous best is a 12.77 @ 108.26 on a 1.93 60'. The conditions were very nice last night. Heres what the run looked like:
60' 1.869
330 5.307
1/8 8.157
MPH 86.23
1000 10.599
1/4 12.669
MPH 109.56
Needless to say, I was happy. The MPH is finally getting close to where it should be, and I'm hoping for another MPH or 2 with a tune. The clutch was still slipping on that pass so I think there is more in it as it sits. Now I just need a clutch and a tune.
Here are the vids:
12.66 pass - http://www.public.asu.edu/~dbump/videos/daniel1266.mpg
Heres another video w/a much better view...didn't go quite as fast on this run but still cut a 1.86 60' - you can see the launch much better on this run:
http://www.public.asu.edu/~dbump/videos/daniel1273.mpg
My previous best is a 12.77 @ 108.26 on a 1.93 60'. The conditions were very nice last night. Heres what the run looked like:
60' 1.869
330 5.307
1/8 8.157
MPH 86.23
1000 10.599
1/4 12.669
MPH 109.56
Needless to say, I was happy. The MPH is finally getting close to where it should be, and I'm hoping for another MPH or 2 with a tune. The clutch was still slipping on that pass so I think there is more in it as it sits. Now I just need a clutch and a tune.
Here are the vids:
12.66 pass - http://www.public.asu.edu/~dbump/videos/daniel1266.mpg
Heres another video w/a much better view...didn't go quite as fast on this run but still cut a 1.86 60' - you can see the launch much better on this run:
http://www.public.asu.edu/~dbump/videos/daniel1273.mpg
Good times!! What is your race weight?
I am running just a tad faster than you with a CC306 and ported heads that are supposed to flow 285/215 @.600", but I am running out of fuel and am hoping that is slowing me down.
I am running just a tad faster than you with a CC306 and ported heads that are supposed to flow 285/215 @.600", but I am running out of fuel and am hoping that is slowing me down.
Originally posted by Grover
Good times!! What is your race weight?
I am running just a tad faster than you with a CC306 and ported heads that are supposed to flow 285/215 @.600", but I am running out of fuel and am hoping that is slowing me down.
Good times!! What is your race weight?
I am running just a tad faster than you with a CC306 and ported heads that are supposed to flow 285/215 @.600", but I am running out of fuel and am hoping that is slowing me down.
Race weight is 3610 lbs. 
Hope fixing your fuel problem gets you to where you want to be.
those are impressive times. my best 1/8 run with the 305, stock heads and shorties was 8.21 @ 86.70. i ran the 1/4 once after that but misplaced the slip...my best run was 12.71 @ 109.8something, but i have no idea what the incrementals were. i've seen people post low 12 second ET's and MPH as high as 113 with the 305 cam and stock heads. i never stuck around long enough to see if i could match those figures. i got the stock heads ported, went with a little bigger cam and blew up.
Originally posted by rumair
those are impressive times. my best 1/8 run with the 305, stock heads and shorties was 8.21 @ 86.70. i ran the 1/4 once after that but misplaced the slip...my best run was 12.71 @ 109.8something, but i have no idea what the incrementals were. i've seen people post low 12 second ET's and MPH as high as 113 with the 305 cam and stock heads. i never stuck around long enough to see if i could match those figures. i got the stock heads ported, went with a little bigger cam and blew up.
those are impressive times. my best 1/8 run with the 305, stock heads and shorties was 8.21 @ 86.70. i ran the 1/4 once after that but misplaced the slip...my best run was 12.71 @ 109.8something, but i have no idea what the incrementals were. i've seen people post low 12 second ET's and MPH as high as 113 with the 305 cam and stock heads. i never stuck around long enough to see if i could match those figures. i got the stock heads ported, went with a little bigger cam and blew up.

My goal is 11s on stock heads, but I'm sure I will need to upgrade to LTs eventually - as well as a 12-bolt and a bigger clutch. A tune wouldn't hurt either.

cef97ws6 - thats w/me in the car.
Originally posted by neil350
Daniel,
Awesome man, your sig says your on stock programing? Thats crazy man, I'm sure with a good tune theres a lot left in that beast.
Daniel,
Awesome man, your sig says your on stock programing? Thats crazy man, I'm sure with a good tune theres a lot left in that beast.
Yes, I'm still running the stock programming. I plan on ordering some pcmforless tuning in the next couple weeks. I want to get it dyno-tuned, but the obd2 software is too expensive right now. I'm hoping tuning will help out a little.
I LOVE THAT CAR BRO!!!! Mine same year same color! well I got a hard top with matchin paint mirrors and top but STILL, I LOVE IT!!!! I hope mine performs the same when I get it all done, you got long tubes or shorties?


