stock deck height lt1 block

Reply Subscribe

Thread Tools

Search this Thread

Nov 7, 2005 | 05:30 PM

Fbody1

Thread Starter

Registered User

Joined: Feb 2000

Posts: 363

From: fl,jax

stock deck height lt1 block

on a stock lt1 block how many thousandths does the piston sit down in the cylinder, going to try to figure new compression ratio, and btw the search function is not working thanks

Nov 7, 2005 | 06:11 PM

FASTFATBOY

Banned

Joined: Jan 2002

Posts: 1,935

From: Mobile, Ala..USA

Re: stock deck height lt1 block

Most are around .026 to .030 stock.

David

Nov 7, 2005 | 08:10 PM

Injuneer

Administrator

Joined: Nov 1998

Posts: 71,094

From: Hell was full so they sent me to NJ

Re: stock deck height lt1 block

Quote:

Originally Posted by Fbody1

on a stock lt1 block how many thousandths does the piston sit down in the cylinder, going to try to figure new compression ratio, and btw the search function is not working thanks

That's odd..... I just typed "deck height" in the "search" screen and got 25 hits.

Please post LT1 questions on LT1/LT4 Engine Tech..... I'll move the thread there for you.

Nov 7, 2005 | 08:13 PM

rskrause

Moderator

Joined: Dec 1969

Posts: 10,745

From: Buffalo, New York

Re: stock deck height lt1 block

Stroke = 3.480"/2 = 1.740"
Rod = 5.700"
Piston CH = 1.550"
Total = 8.990"
Stock deck = ~9.020" to 9.025"
9.025"-8.990" = 0.035"
9.020"-8.990" = 0.030"

Rich