the reason i ask is becuse ive heard if you milled you heads enough you will need shorter pushrods. but if you go to high of a lift you will need longer.

im going to mill my heads .020 and im going to have a lift of .595. i had to put longer valves in the heads so i figured longer pushrods but im milling my heads. so can someone tell me what i need to buy (length).

 

ttt

 

Longer- with plus .100 valves I went 7.300. I thought I checked for length good enough,but I had to buy pushrods twice. Mine would vary. (12 I left at 7.25) ,4 I went 7.300.

 

so you think i will still need longer pushrods even with the milled heads.

 

I used this method.
http://www.holley.com/HiOctn/TechSer...ECVTTech1.html