Performace Question
#1
Performace Question
Does it take alot to get an LT1 car to run with an LS1? I have a 95 LT1 A4 currently with CAI and Hooker cat back. Last time i went to the track i ran a 13.7 @ 100 which i thought was pretty good until i see the LS1 guys running low 13's high 12s with just a lid and catback. What does it take to run numbers like that with the LT1? Kinda makes me wanna go with an LS1 now
Last edited by Bobsep84; 06-07-2006 at 03:54 PM.
#7
Re: Performace Question
Originally Posted by Bobsep84
What kinda times would i look at if i added a hot cam kit and mac mids? Id like to keep the stock converter if i could
#8
Re: Performace Question
Mods in sig I can pull a little on my buddies LS1 Camaro with SLP lid and Loudmouth from a highway roll, but under 65mph its all LT1. My car also weighs more and has larger/heavy rims/tires.
-Dustin-
-Dustin-
Last edited by Bersaglieri; 06-07-2006 at 11:32 PM.
#9
Re: Performace Question
Right now on street tires I run 13.7-13.8 with a 2.2 60 A4 car. Nitrous plugs, did not have the fuel pump booster harness hooked up.
Hold off LS1 cars till the 1/8th Around 80mhp they catch up.
No LS1 car around here thats near stock wants to run me in the 1/8th on street tires HAHAHA
I don't have a lot, some suspension, tune, weight and other basic stuff.
Once I throw on my pro stars with the E.T.'s it will be door to door threw the traps or super close.
Once I hit the little red button it will be all over HAHAHA. Stall and headers next and that will take them on the motor.
Cold air, 1.6 roller rockers, tune, long tubes and exhaust, at least a 3.42, sticky tires, stall should do it.
Hold off LS1 cars till the 1/8th Around 80mhp they catch up.
No LS1 car around here thats near stock wants to run me in the 1/8th on street tires HAHAHA
I don't have a lot, some suspension, tune, weight and other basic stuff.
Once I throw on my pro stars with the E.T.'s it will be door to door threw the traps or super close.
Once I hit the little red button it will be all over HAHAHA. Stall and headers next and that will take them on the motor.
Cold air, 1.6 roller rockers, tune, long tubes and exhaust, at least a 3.42, sticky tires, stall should do it.
Thread
Thread Starter
Forum
Replies
Last Post
dluna333
Suspension, Chassis, and Brakes
15
03-13-2015 12:30 PM
jasonduaine
LS1 Based Engine Tech
3
03-07-2015 09:44 AM
Hurin
Suspension, Chassis, and Brakes
4
12-13-2014 07:38 PM