LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

New Numbers

Old Oct 18, 2003 | 06:18 PM
  #1  
kevinsz2895's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 56
From: greenville nc
New Numbers

Guys i just perchased a 97 Z28 and put Moroso CAI and Flowmaster muffler and i have a 315 drag radial and i run at the local track

60ft -2.1 i was spinning with 315 at 11lbs 80 mph
1/4 13.80 104

is that good for a stock car with 17x11 on the back?? just wondering???

p.s. its a m6
Old Oct 18, 2003 | 07:16 PM
  #2  
aintno6's Avatar
Registered User
 
Joined: Oct 2003
Posts: 735
From: Windy City
thats pretty decent for the mods you have. I would see if you could goto the track when it has better track prep, or if there is a better track. Cause I run 2.0 60ft with basic street tires. Did you heat them tires up really good?
Old Oct 18, 2003 | 07:19 PM
  #3  
KeVMaN's Avatar
Registered User
 
Joined: Oct 2002
Posts: 645
From: Modesto, CA
you can probably shave about 3 tenths off if you got a good launch. alot of peeps do 2.0 60' bone stock
Old Oct 19, 2003 | 01:22 AM
  #4  
kevinsz2895's Avatar
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 56
From: greenville nc
yeah i heated the tires up im hoping for a 1.9 60ft if so that will drop my et's to a 8.6 and 13.60 i cant complain with that on a mostly stock LT1
Old Oct 19, 2003 | 11:29 AM
  #5  
Spinner's Avatar
Registered User
 
Joined: Jul 2003
Posts: 2,945
From: Fort Benning, GA
Don't run DRs under 18 psi, you're just hurting your times. Under about 18 psi, they start to cup, and you wont get good contact with center tread (they will ride on the outer edge around the sidewall) and the increase in internal friction will slow your MPH down a bit
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Boss002
Autocross and Road Racing Technique
7
Jan 20, 2016 12:17 PM
fundone2000-RZ
Pacific
0
Jul 21, 2015 07:21 AM
Catmaigne
Parts For Sale
0
Jul 14, 2015 05:17 PM
gelbza
General 1967-2002 F-Body Tech
3
Jul 12, 2015 08:10 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:11 PM.