New Hot Cam times. (what to Improve)
New Hot Cam times. (what to Improve)
went to track and heres my slip
60' time didnt register
1/8 8.217@87.05
1/4 12.64@114.82
60' 1.9
1/8 8.195@88.21
1/4 12.50@112.15
All i have done to suspension is BMR toque arm and Nitto DR . Just ordered a set of Hoosier QTP's and skinny's. Going back with the slicks and Lower control arms what do you think i can hit, with a decent launch.
60' time didnt register
1/8 8.217@87.05
1/4 12.64@114.82
60' 1.9
1/8 8.195@88.21
1/4 12.50@112.15
All i have done to suspension is BMR toque arm and Nitto DR . Just ordered a set of Hoosier QTP's and skinny's. Going back with the slicks and Lower control arms what do you think i can hit, with a decent launch.
Originally posted by FastZinTennessee
How the hell did you pick up 27+ mph on the last half of the track on your first run(or can I just not add/subtract)
How the hell did you pick up 27+ mph on the last half of the track on your first run(or can I just not add/subtract)
Even with a six speed I don't see picking up 27 mph from the 1/8 to 1/4.... I have ported heads, HOTcam and bolt ons, I have trapped 87mph in the 1/8 before but would be lucky to see 110 in the 1/4!
dug out one of my old timeslips from a couple years ago. I think this is one from my 95 Z back then.
60ft 2.081
1/8et 8.948
1/8mph 76.94
1/4et 13.97
1/4mph 99.13
hows that? 23mph increase. 27 could be totaly possible w/the right combo.
60ft 2.081
1/8et 8.948
1/8mph 76.94
1/4et 13.97
1/4mph 99.13
hows that? 23mph increase. 27 could be totaly possible w/the right combo.
With that MPH very low 12's are possible with a good 60' of like a 1.8. I'd guess your 60 was about a 2.0 based on those times. I just ran a 12.18 @115 again today on just a 1.90 60'. I couldnt hook worth crap today, made 5 runs and only made a full run on two of them, the other times it spun off the line, that was on BFG DR's. I know I can hit a very high 11 with a 1.7 60'. Tried once launching at 5k today to get there and it just hit the rev limiter (6500)
Last edited by GREGG 97Z; Apr 10, 2004 at 07:01 PM.
Originally posted by bski224
Why is that NOT possible. I do have a 6 spd. I had to shift into 5th due to my gears and my 25" tires i was bouncing the rev.
Why is that NOT possible. I do have a 6 spd. I had to shift into 5th due to my gears and my 25" tires i was bouncing the rev.
I dont understand why u think that????? i ran about 9 times that day. My best was the 12.50 but all the others were like 12.60-13.00 i was f in around with the launch. All my MPH was 110 or a little better and my best 60' as a 1.8. I HIGHLY doubt the tracks equpiment was f'd up.
Thread
Thread Starter
Forum
Replies
Last Post
Smokn '94 Z
Drag Racing Technique
16
Aug 4, 2002 06:11 PM
Smokn '94 Z
Drag Racing Technique
12
Jul 28, 2002 02:38 AM



