need some help......
need some help......
i posted this in the general section, but didnt get any help. so here is the deal, i need to sell my car. i broke up with my g/f and always worked on the car at her dads garage. now i dont have a place to work on it and would like to get something different
the details:1993 z28 hardtop 135k miles on chassis
new 355 w/forged pistons and GM pm rods ~3k miles
new optispark ~100 miles
newish waterpump ~30k miles
3.73 gear
LE1 heads
Lt4 hotcam
30lb SVO injectors
new GM lifters
New pushrods
Comp pro magnum 1.6 rockers
BBK ceramic coated headers
B&M shift kit
B&M tranny cooler
2600 stall
1le intake elbow
K&N FIPK
Madz28 tune
flowmaster w/ stainless tips
good paint and interior (good, not great. no major tears or dings)
new 02 chrome camaro wheels with 80% tread left
several new misc sensors
ran 13.8 before heads/cam/ stall. havent been to the track with the new stuff, but should be good for mid 12's id think. so whats it worth do you suppose?
the details:1993 z28 hardtop 135k miles on chassis
new 355 w/forged pistons and GM pm rods ~3k miles
new optispark ~100 miles
newish waterpump ~30k miles
3.73 gear
LE1 heads
Lt4 hotcam
30lb SVO injectors
new GM lifters
New pushrods
Comp pro magnum 1.6 rockers
BBK ceramic coated headers
B&M shift kit
B&M tranny cooler
2600 stall
1le intake elbow
K&N FIPK
Madz28 tune
flowmaster w/ stainless tips
good paint and interior (good, not great. no major tears or dings)
new 02 chrome camaro wheels with 80% tread left
several new misc sensors
ran 13.8 before heads/cam/ stall. havent been to the track with the new stuff, but should be good for mid 12's id think. so whats it worth do you suppose?
Re: need some help......
If you found the right person it would be worth more, but without seeing pics I would guesstimate around $4500-6000 range. I know its kinda broad but with no pics its hard to tell.
Re: need some help......
Are you sure you want to sell it? Sounds like you put a lot of work into it.... You say you used to work on it at your gf's, where will you work on the new ride? Why not keep this one since it sounds like you wont be able to work on the new one as much?
Re: need some help......
Sorry... but this forum is for "LT1/LT4 Engine Tech". Its not an overflow board for questions that don't get answered on the correct forum. Maybe try the Lounge for more responses.
Thread
Thread Starter
Forum
Replies
Last Post



