Lunati: 383 stroker kit
Heads: stock port & polish
Intake: stock port & polish
TB: 58mm
Headers: Hooker super comps.
Gears: 3.42's
Converter: 3,500 stall
MAF: descreened

Can anyone think of something else I need or might want?
Thanks
-James

 

9in. rear end, procharger, no2

 

To accomplish what??? What budget???



Rich Krause

 

Big check book...

 

12 bolt or nine inch rear, massively built tranny, subframe connectors, suspension components, tubular K member.........

 

You might want to run something other than the stock cam

Click the "Mod's List" link in my signature below, and make sure you have an equivalent replacement part for each item listed.

 

1FASASZ- If I do a rear end I would rather go with a 12 bolt, don't want any power adders either, just a good old stroker motor!

rskrause- I want to be in the low 11's but still get descent gas milage, and any budget cause I just want a mod list for right now!

IllusionalTA- lol

FastZinTennessee- 12bolt yes, Theres a guy in town that does nice work on trannies , suspension yes

Injuneer- The Lunati stroker kit comes with a cam lol, but I might upgrade to a custom grind cam, Thank you very much for the mod list, that really helps!

 

do a search on rear ends and read up on both 9 in and 12 bolt. with a good rear end and clutch some slicks and a383, you should be able to do 11's all day