I believe you read it interfered with FLP headers... not SLP. I have the set up with FLP's and definately had to modify the Starter to work with the FLP's.. I have not heard anything about the SLP headers..

 

Why not just use the starter from a 4.3 if your looking for something smaller and a little more torquey ?

-Shannon

 

Um yes, LT1 starters ARE gear reduction. How do I know? Because I have had
mine apart and saw it with my own eyes. It is kinda deceiving because the LT1 starter uses a planetary gear reduction so the motor and the drive gear are still in line with each other, unlike the LT4 (and others) which use a regular gear reduction (1 gear on the motor, a larger gear on the output shaft.) I do like the sound of the LT4 starter and when I need a replacement, that is what I will get.

 

Perhaps your spelling is that bad, but mine isn't.

I did a search, here is the link.

http://web.camaross.com/forums/showt...ht=LT4+Starter

Clearly says SLP headers and LT4 starter. Not enough info to figure out what is going on. Thats why I was asking.

Z28

 

Clearly he was talking about earlier in this post as you were clearly talking about a different thread, don't be an *** he just read your post wrong.

 

Learn to read.

He answered every question in my post except he assumed that I was making a mistake. So how could he have thought I was talking about an earlier post?

There is an "***" here, but it is you, "Dumbass 94".

Nobody asked your opinion on anything.

If you don't have anything useful to add, like hey there may be a clearance problem, then just stay out of it.

Z28

 

Because in an earlier post someone posted about fitment problems with FLP's, you need to learn to comprehend dumb ***.

 

My bad.... Now you tought me something.. But in no way was I questioning you intelligence.................... until now! Now can you please tell me why you gotta be like that? This is a forum to discuss and learn. People with your tough guy attitude behind a keyboard are pretty much why I don't visit these sites very often anymore. I would love to get into a personal attack thread here with you now but I am too old for that and it is Christmas and my first one with my new daughter and that is all that matters. Once again I am sorry for just making sure you were on your right track. It was not a attack on you, believe me or not. That is not my style. Happy Holidays... (Seriously)

 

I suggest everyone calms down. It's not highly looked upon to be swearing and yelling at each other over such a silly mistake on this board. Internet hard asses are not favored here.

If your going to be cross with everyone, I suggest you cut your losses and leave right now.

-Shannon

 

I think people should note who started the name calling.

I wasn't me.

It was "'94 Bad A Z28"

He still has nothing to add and is still posting, very sad.

No surprise he has "***" abreviated in his handle, but due to his bad spelling he leaft out the "D".

I think he means to say, '94 Bad DA Z28.

Pretty anoying when people tell you what you are saying rather than asking, isn't it?

I have never had much luck teaching people manners, if they don't know any by the time they learn to write it is too late.

 

 

I somehow snapped the nose right off my stock LT1 starter.

 

I see they got a good shot of you winning that event.

How many others did you compete in?

 

Same thing on a remanned AutoZone starter. Put the origional 1995 delco on with no issues at all

-Shannon

 

But Injuneer does it sound cool, like the lt4 starter?