How tight for header bolts?
Registered User
Joined: Mar 2001
Posts: 956
From: Winston Salem, NC
if you can get a torque wrench on one of them, then get a regular wrench on it and feel how tight it is...tighten the rest down to as close as you can. From Injuneer's install guide:
The spec for torquing them is 30-35 ft-lb (check-are these 3/8"-16?) using grade 8 bolts with oil, and 23 ft-lb using moly. I think the anti-seize most closely matches "moly"
The spec for torquing them is 30-35 ft-lb (check-are these 3/8"-16?) using grade 8 bolts with oil, and 23 ft-lb using moly. I think the anti-seize most closely matches "moly"
Thread
Thread Starter
Forum
Replies
Last Post
Victor Lamb
Suspension, Chassis, and Brakes
3
Aug 26, 2017 02:52 PM
94Z28LS1toLT1
General 1967-2002 F-Body Tech
8
Apr 7, 2015 05:37 AM
SavageZ28
Automotive News / Industry / Future Vehicle Discussion
17
Jul 14, 2002 11:04 PM