Help With purchasing 1.7 RR
#1
Help With purchasing 1.7 RR
Hey guys,
Im seriously considering putting some 1.7 RR on my lt1. It seems like a great mod that isnt to difficult to do. My question is can anyone give me a detailed parts list of what I need to order and maybe the best places to order the parts from. Also a rough guesstimate as to how much I will have piled up in parts would be good to..
Im seriously considering putting some 1.7 RR on my lt1. It seems like a great mod that isnt to difficult to do. My question is can anyone give me a detailed parts list of what I need to order and maybe the best places to order the parts from. Also a rough guesstimate as to how much I will have piled up in parts would be good to..
#2
1.7 rr will definately require the use of NEW springs
while you are there you should get 7/16 studs,pushrods and guide plates
there are a few sponsors on this board that sell these items
https://securehost98.hrwebservices.net/~herronp/store/
while you are there you should get 7/16 studs,pushrods and guide plates
there are a few sponsors on this board that sell these items
https://securehost98.hrwebservices.net/~herronp/store/
Last edited by 96m6lt1; 04-02-2009 at 11:07 AM.
#4
stock cam. A lot of guys on here say that this mod is good for an extra 25 or so to the ground. I want to even say i remember when i searched it someone putting up a before and after dyno of a full bolt on lt1 with and without the scorpions..
Thread
Thread Starter
Forum
Replies
Last Post
cmsmith
2016+ Camaro News, Sightings, Pictures, and General Discussion
7
09-14-2015 09:25 PM