LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Fuel System....

Old Jul 17, 2006 | 06:23 PM
  #1  
jmangler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 107
Fuel System....

Whats the best Fuel Set up I can get without going with a Fuel Cell. I was going to go with the Aeromotive Eliminator EFI system but I would need a Fuel cell and I dont want to go that way. Are any of you running a intank set up, so that you don't need a Fuel Cell/Sump pump, and does it still give you the Volume you need.....

Thanks
Old Jul 17, 2006 | 06:38 PM
  #2  
1racerdude's Avatar
Banned
 
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: Fuel System....

Originally Posted by jmangler
Whats the best Fuel Set up I can get without going with a Fuel Cell. I was going to go with the Aeromotive Eliminator EFI system but I would need a Fuel cell and I dont want to go that way. Are any of you running a intank set up, so that you don't need a Fuel Cell/Sump pump, and does it still give you the Volume you need.....

Thanks
Racetronics makes a duel in tank unit but ya have to call them to get it,if that's the way ya want to go.
I've got a Aeromotive 1000 with a sump in the stock tank but ya don't need that unless ya got a blower or BIG HP.
Old Jul 17, 2006 | 09:19 PM
  #3  
jmangler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 107
Re: Fuel System....

Where did you get the sump from. Is it specificly design for the Camaro? Or did you have it custom made? Someone said I can get A/N fittings welded in the bottom of the tank...

I need a good fuel system!

383 Forged low compression, heads extr...
D1SC/ FMIC 14psi
75lb injectors...
Old Jul 17, 2006 | 09:27 PM
  #4  
1racerdude's Avatar
Banned
 
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: Fuel System....

Originally Posted by jmangler
Where did you get the sump from. Is it specificly design for the Camaro? Or did you have it custom made? Someone said I can get A/N fittings welded in the bottom of the tank...

I need a good fuel system!

383 Forged low compression, heads extr...
D1SC/ FMIC 14psi
75lb injectors...
Look in the Summit catalog. Then ya got to get someone willing to weld and cut on a tank that has had fuel in it. Some radiator shops will do it if ya take it out.

The D1 would warrant a call to Aeromotive.
Old Jul 17, 2006 | 09:35 PM
  #5  
jmangler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 107
Re: Fuel System....

I will have to empty it out and flush it out with water then let it air out for a while. Hopefully I can find someone to weld it up!


Thanks
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CaptainObviousI
Fuel and Ignition
29
Apr 29, 2021 10:35 PM
ad356
LT1 Based Engine Tech
8
Apr 16, 2015 05:38 PM
charchri4
General 1967-2002 F-Body Tech
11
Apr 14, 2015 06:40 PM
2001CamaroGuy
LS1 Based Engine Tech
10
Apr 5, 2006 10:56 PM
tbyrne
LS1 Based Engine Tech
8
Jul 2, 2002 05:37 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:30 AM.