fixing intake leak
Registered User
Joined: Jan 2001
Posts: 870
From: Florence Mississippi
Originally posted by S.J.S.
you can match port the intake to the heads, but your not doing the heads so I see no purpose in that. As far you mechanic said about polishing the intake.....you don't wanna do that. The intake should be sanded with 80 grit at its finest beacuse you need a slightly rough surface for the fuel and air to atomize (is that the word) properly.
you can match port the intake to the heads, but your not doing the heads so I see no purpose in that. As far you mechanic said about polishing the intake.....you don't wanna do that. The intake should be sanded with 80 grit at its finest beacuse you need a slightly rough surface for the fuel and air to atomize (is that the word) properly.
well dang i just had mine ported n polished
i wish i had known that..will it mess up anything or will i be fine?
Thread
Thread Starter
Forum
Replies
Last Post
Magenta_Hearts
New Member Introduction
4
Mar 25, 2015 10:24 AM