CamaroZ28.Com Message Board

LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

cc 306

Thread Tools
 
Search this Thread
 
Old Nov 29, 2004 | 06:28 PM
Share
  #1  
FastZ8's Avatar
FastZ8
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 137
From: Manitoba, Canada
cc 306
i'm putting the comp 306 cam and 1.6 rr's and new springs and porting and polishing heads as much as i can and getting the intake port matched. My car is a 94 z28, m6. I have all the bolt on's. I was wondering if anybody else has this combination and what they think of it and I was wondering what kind of power i would be looking at.
Reply
Old Nov 30, 2004 | 12:12 AM
Share
  #2  
FastZ8's Avatar
FastZ8
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 137
From: Manitoba, Canada
Re: cc 306
somebody?
Reply
Old Nov 30, 2004 | 12:17 AM
Share
  #3  
94TA25ann's Avatar
94TA25ann
Registered User
 
Joined: Jan 2004
Posts: 281
From: San Jose, CA
Re: cc 306
Do a search. There is tons of info on this site about that cam and different setups.
Reply
Old Nov 30, 2004 | 01:21 AM
Share
  #4  
TransAmGT's Avatar
TransAmGT
Registered User
 
Joined: Apr 2002
Posts: 694
From: Milledgeville, Ga USA
Re: cc 306
Well if you just put the cam PP heads and intake....you will probably get about 380 rwhp

You can get around 350 w/stock heads
Reply
Old Nov 30, 2004 | 01:47 AM
Share
  #5  
Z95m6's Avatar
Z95m6
Registered User
 
Joined: Oct 2001
Posts: 6,070
From: newton, kansas, USA
Re: cc 306
Originally Posted by 94TA25ann
Do a search. There is tons of info on this site about that cam and different setups.
ditto
Reply
Old Nov 30, 2004 | 09:04 AM
Share
  #6  
FastZ8's Avatar
FastZ8
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 137
From: Manitoba, Canada
Re: cc 306
sweet. Thankx people!
Reply
Old Nov 30, 2004 | 10:13 AM
Share
  #7  
grygst76's Avatar
grygst76
Registered User
 
Joined: Dec 2002
Posts: 966
From: Gloucester-Spfld Mass
Re: cc 306
Originally Posted by FastZ8
i'm putting the comp 306 cam and 1.6 rr's and new springs and porting and polishing heads as much as i can and getting the intake port matched. My car is a 94 z28, m6. I have all the bolt on's. I was wondering if anybody else has this combination and what they think of it and I was wondering what kind of power i would be looking at.
check my sig w/MAC shorties
Reply
Old Nov 30, 2004 | 10:37 PM
Share
  #8  
FastZ8's Avatar
FastZ8
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 137
From: Manitoba, Canada
Re: cc 306
thanks for the good info people
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
my money pit
truecontr3
LT1 Based Engine Tech
15
Oct 11, 2015 09:30 AM
Difference between 306 and 305 tuning?
Kreinmc
LT1 Based Engine Tech
2
Apr 5, 2003 12:13 PM
Is 3.73 too little gear for a 306?
jimbo95Z28
LT1 Based Engine Tech
2
Mar 26, 2003 12:59 PM
Everyone with a CC306 come in!
hsyr
LT1 Based Engine Tech
14
Jan 27, 2003 09:48 PM
is anyone running the same et as a hotcam with a 306?
PredatorZ28
LT1 Based Engine Tech
8
Jan 27, 2003 01:09 AM
Back to Subforum
LT1 Based Engine Tech
View Next Unread
Part number for the good oil pump spring?




Advanced Search

All times are GMT -5. The time now is 03:34 AM.