Anyone Running A ZZ4 or ZZ3 Cam?
#16
I received the ZZ3 cam in a screwed up LT4 Hotcam purchase and I will tell you that it will not fit a vented opti application unless you do some modifications. You would need a longer dowel pin and you would have to drill out the center to accept the opti. Now it might work fine on a 93-94 LT1 but I am not for sure.
#17
Originally posted by rocmemphis
I received the ZZ3 cam in a screwed up LT4 Hotcam purchase and I will tell you that it will not fit a vented opti application unless you do some modifications. You would need a longer dowel pin and you would have to drill out the center to accept the opti. Now it might work fine on a 93-94 LT1 but I am not for sure.
I received the ZZ3 cam in a screwed up LT4 Hotcam purchase and I will tell you that it will not fit a vented opti application unless you do some modifications. You would need a longer dowel pin and you would have to drill out the center to accept the opti. Now it might work fine on a 93-94 LT1 but I am not for sure.
#18
Hmmm, Interesting.
I called Comp cams, Crane cams, and Isky.
Comp offers a 206/230 with .480/.510 lift 112 LSA
Crane Offers a 210/224 with .479/.518 lift 112 LSA
Isky offers a 209/217 with .465/.485 lift 112 LSA
The ZZ4 specs I am trying to match are 208/221 with .474/.510
All the lfts are with a 1.5 rocker BTW.
Any recomendations?
I called Comp cams, Crane cams, and Isky.
Comp offers a 206/230 with .480/.510 lift 112 LSA
Crane Offers a 210/224 with .479/.518 lift 112 LSA
Isky offers a 209/217 with .465/.485 lift 112 LSA
The ZZ4 specs I am trying to match are 208/221 with .474/.510
All the lfts are with a 1.5 rocker BTW.
Any recomendations?
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM