Another question about pulling/installing the heads..
Thread Starter
Registered User
Joined: Jul 2000
Posts: 959
From: Green Bay, WI
Another question about pulling/installing the heads..
The ARP bolts say to use thread lock on them. Should I install them when the threadlock is wet yet or should this be put on ahead of time and allowed to dry before installing. Also, should I use thread lock on the intake?
Aaron
Aaron
Registered User
Joined: Nov 2001
Posts: 646
From: West Palm Beach, FL
It's not thread lock, but Teflon Thread SEALANT you want. The best would be to use ARP's sealant. According to ARP, their sealant will never dry. That's good, because they recommend retorquing all the head bolts after the first heat cycle.
Thread
Thread Starter
Forum
Replies
Last Post
dluna333
Suspension, Chassis, and Brakes
15
Mar 13, 2015 12:30 PM
jasonduaine
LS1 Based Engine Tech
3
Mar 7, 2015 09:44 AM
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
2
Dec 19, 2014 08:48 PM
Hurin
Suspension, Chassis, and Brakes
4
Dec 13, 2014 07:38 PM
