96 Z A4 no selector for 1st.
96 Z A4 no selector for 1st.
My 94 z A4 does not have a position to put the car in first. Im fairly sure that I have seen other years with a first gear. Im wondering If I could switch it out or something?
Anyone know what I am talking about??
Sorry if its confusing.
Ed
Anyone know what I am talking about??
Sorry if its confusing.
Ed
You have a 2.73 rear gear ratio. To get 1st gear remove shift **** and plate. Move shifter done to 2nd gear,there you will see
a black piece of plastic stopping the shifter from going down farther.Take a knife and cut the little piece of plastic out and now you have 1st gear. Cars with the 2.73 gear had some sort of noise restriction at certain speeds and gear.
a black piece of plastic stopping the shifter from going down farther.Take a knife and cut the little piece of plastic out and now you have 1st gear. Cars with the 2.73 gear had some sort of noise restriction at certain speeds and gear.
Thread
Thread Starter
Forum
Replies
Last Post
Sarahrope64
LT1 Based Engine Tech
0
Nov 27, 2014 11:17 AM
CamaroGuy22
LT1 Based Engine Tech
9
Jun 19, 2003 10:34 AM



