LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

Developed a miss...

Old May 23, 2008 | 12:43 PM
  #1  
DWray's Avatar
Thread Starter
Registered User
 
Joined: Mar 2001
Posts: 852
From: Nude Bra Fulls, Texas
Developed a miss...

Yesterday, my buddy and I decided to do a bunch of stuff to my car since we had to fix a dead water pump. We did plugs (TR55IX), wires (MSD), cleaned the MAF, cut the airbox for the free ram-air mod, cleaned the throttle body, cleaned/re-oiled the K&N air filter... basically a nice tune-up.

However, I developed a miss. I played with the wires some more this morning, but would it be possible that one of them just isn't on soundly (read: #7)? I pushed in on there as hard as I could, but the miss is still there. You can hear it once the car gets warm at idle all the way up to redline.

The plugs were gapped at .055. That's in stock range, right? It wouldn't be spark blowout, especially at idle, I would think.

Any ideas? It almost has to be the wires... I hope.

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
13
Oct 3, 2015 07:27 PM
jayblev95
LT1 Based Engine Tech
11
Sep 26, 2015 09:44 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Jun 19, 2015 01:34 PM
bitchinangel01
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Jun 11, 2015 10:15 AM
guionM
Automotive News / Industry / Future Vehicle Discussion
69
Nov 30, 2006 02:01 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:50 PM.