General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

Need wheelbase info to load 94 Z on trailer

Thread Tools
 
Search this Thread
 
Old May 18, 2006 | 10:20 PM
  #1  
Cool ZR's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 322
From: Ontario, Canada
Question Need wheelbase info to load 94 Z on trailer

Hello,

I need to verify the info I got on the wheelbase for a 94 Camaro. I was told it is 101" center to center.

Can anyone else please confirm that and give me the dimension from the center of the wheel to the outter most point on the front and rear bumpers?

The problem is I have a trailer with a large box on the front and it was tight with a 3rd gen firebird, the bumper kissed the box.

Thanks,
Old May 19, 2006 | 07:47 AM
  #2  
Shon Herron's Avatar
Registered User
 
Joined: Jul 1999
Posts: 2,054
From: Six Mile, SC, USA
Re: Need wheelbase info to load 94 Z on trailer

We used a 18' trailer, 2' of that is dove tail, so 16' is plenty and it leaves room at the front and rear...
Old May 19, 2006 | 07:59 AM
  #3  
Cool ZR's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 322
From: Ontario, Canada
Re: Need wheelbase info to load 94 Z on trailer

Thanks for the info on that. My concern is that I have about 36" from where the front wheel on the car is tied down to the trailer to the storage box on the front of the trailer. I am good on length.

The trailer is usually used for a vintage racecar that has not much past the front wheel.
Old May 19, 2006 | 08:02 AM
  #4  
Shon Herron's Avatar
Registered User
 
Joined: Jul 1999
Posts: 2,054
From: Six Mile, SC, USA
Re: Need wheelbase info to load 94 Z on trailer

I would be concerned on width too. We can barely open the doors due to the fenders on the trailer.

Best thing to do is measure it or put it on the trailer.
Old May 19, 2006 | 11:15 AM
  #5  
Cool ZR's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 322
From: Ontario, Canada
Re: Need wheelbase info to load 94 Z on trailer

Yeah, that's my problem though... I know the width will be good. The problem is that the parts car is about 5 hours from here and my camaro is in storage. I won't know till I get down there with the trailer I am borrowing...

*L* Hopefully it'll fit, worse comes to worse, I squash the nose since it's cracked anyways.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
karpetcm
Parts For Sale
5
Aug 14, 2015 03:02 PM
whitehooptie
Computer Diagnostics and Tuning
3
Aug 10, 2015 07:02 AM
techstar
LS1 Based Engine Tech
8
Aug 6, 2015 11:20 AM
colts0455
LT1 Based Engine Tech
20
Jul 20, 2015 09:52 AM
asilomar244
LT1 Based Engine Tech
17
Jul 12, 2015 05:53 AM




All times are GMT -5. The time now is 12:17 AM.