is this an opti problem?
My car will just turn over but won't crank I checked to see if fuel was coming up through the lines and it was so I guessing that its not igniting i guess but could someone help me out because I planning on going through with the opti surgery in the morning
It could be ICM/COIL, Opti just passes the spark alone.. unplug your wire from the opti/coil, and replace it with a spark plug wire put a plug on the end, and ground it (lean it) against your block. Crank it and look for spark. If you have no spark out of the coil, then I'd look at replacing the coil or ICM (and or checking all the wires leading to them)
How about going through some of Shoebox's "how to's?"
http://shbox.com/1/4th_gen_tech2.html#opti_test
Might be able to help diagnose before you keep throwing money at it.
-Ivan
http://shbox.com/1/4th_gen_tech2.html#opti_test
Might be able to help diagnose before you keep throwing money at it.
-Ivan
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
grabbem88
LT1 Based Engine Tech
23
Mar 18, 2015 01:25 PM
Alex Barnes
LT1 Based Engine Tech
16
Jan 24, 2015 10:21 PM



