Will stock fans work with a D1 blower

Reply Subscribe

Thread Tools

Search this Thread

03-14-2010, 07:55 PM

stephenpen

Registered User

Thread Starter

Join Date: Nov 2008

Location: Barrie, Ontario

Posts: 321

Will stock fans work with a D1 blower

Will stock rad fans work with a D1 blower ? I was going to stand my rad up but I can't hack-up my car like that.
Also I'm cutting a hole in the front bumper to feed the intercooler with fresh air. Will that make the car run cooler or is there not enough air flow to make a difference. I did remove all the plastics and washer bottle hoping it would help cooling.

03-14-2010, 10:16 PM

The SRZ

Registered User

Join Date: Sep 2007

Location: FL

Posts: 397

Run fine w/ the factory stuff on my F1. Don't see why you'd be any different.

03-14-2010, 10:52 PM

fabgmc4me

Registered User

Join Date: Feb 2006

Location: Hinckley, OH

Posts: 63

Everything fit fine with my D1SC and a 8 rib setup.

When I went to a F1a and a 12 rib, I had to hammer the frame, and move the radiator/fans forward just a bit.

03-15-2010, 01:24 PM

ramair96ws6

Registered User

Join Date: Mar 2000

Location: Las Vegas Nv.

Posts: 570

I ran stock fans no hammer mods. I built alluminum spacers for the bolts on the driver side to move the fan closer to the radiator. it gave me the 1/4" i needed.

03-15-2010, 05:23 PM

RUNMYTA

Registered User

Join Date: Sep 2000

Location: Bristol, Tn

Posts: 232

As ramair96ws6 said just make you some 1/4in spacers and move the fans closer to the radiator and you will be fine. I actually used a couple of aluminum tubing cut in 1/4 spacers for mine.