I have the 8psi P1SC kit for a TransAm. I've noticed that the crank pulley wobbles about 1/16th of an inch side to side at idle. Is this normal?

I made sure there was no raised lettering on the harmonic balancer and wire brushed everthing so it was perfectly clean as per the ATI instructions. Everything is torqued properly. I haven't thrown a belt with it, but I was thinking it can't be all that good for the crank. The harmonic balancer is running perfectly true.

Thanks,

Brent M.

 

When I first put mine (P600B 8#) on it had a off center wobble, pulled it off and put it back on and it was fixed. Seemed kinda hit or miss. But it sounds like yours isn’t sitting flush on the pulley face is it warped?

Kris