Im going to be doing a cam swap when i install the blower so i went ahead and got a cc305 cam, beehive springs and 1.5 magnum rockers. I got the cam because thats what summit and comp cams suggested for a blower. I want something with a descent lope or at least a noticeable idle. I hear people say that this is a very mild cam and doesnt have much of an idle. This car is not a daily driver, the rest of the engine is stock and i dont plan to touch the heads for a while so was this a good cam choice for me? I know this question was asked just recently but that member had a built stroker motor, and i couldnt find a definete answer when i did a search. This is an M6 car with long tubes, loudmouth and 4.10s.

 

The cc305 is similiar to a LT1 Hotcam from what I've heard. The 305 is not the best choice for a blower cam. The one I have for sale in the FOR SALE section is the cam I had for my original setup if you want to look at the specs, and is a very good cam. Your stock heads wont take advantage of it, but it would be a good choice. Also 1.6 RR's would help instead of 1.5's. Right now the cam is spoken for, but should that fall through I'll let you know. It definately has a nice sound! You wouldn't be disappointed.

 

if i where you id save the cash your gonna spend on the cam and other upgrades for the shortblock and use it for parts too rebuild that stock shortblock.. and id start with a good set of pistons